Why are there so many problems with 3D printing?
This is another of the most common 3D printing problems. This typically happens when part of the old filament gets snapped off and remains in the nozzle when you load a new one. When you try printing, the old filament prevents the new one from extruding, resulting in a blocked nozzle.
How does 3D Issue stay ahead of the market?
Add your own branding, collaborate with your team members, and take advantage of our integrated analytics and API available. 3D Issue strives to stay ahead of the market as we have done so over the last 12 years thanks to our excellent innovation team and our superior Digital Publishing Software
Can a 3D printer break when printing PLA?
If this occurs, the print surface may even break if it is a BuildTak type, as the sticker will be torn off the bed. This can also happen with glass. This happens mostly with materials such as ABS or Nylon, and it is very difficult for it to happen when printing PLA. Depending on our problem we can look for a solution accordingly:
Why is my 3D printer lifting off the bed?
This is when your print is warping or lifting off the bed because of insufficient adhesion. It is one of the most common 3D printing problems which can be caused by any number of things. This occurs when your nozzle is either too close or too far in different locations across the bed. To fix this, you’ll need to “level” the bed.
Many common 3D printing problems stem from a poor first layer. There’s a couple of things that can go wrong when printing your first layer. The first layer of your print is probably the most important layer. As foundation to your whole print, it is…
Add your own branding, collaborate with your team members, and take advantage of our integrated analytics and API available. 3D Issue strives to stay ahead of the market as we have done so over the last 12 years thanks to our excellent innovation team and our superior Digital Publishing Software
How to troubleshoot 3D print quality on mobile?
On mobile: There is a Troubleshoot Menu (contents) at the top of the page for easy navigation. Once open, click on the problem you’re experiencing to jump to that section. Otherwise, scroll down the sections to read up on different problems and find what compares to your prints. The heading beneath each picture can be clicked to expand.
If this occurs, the print surface may even break if it is a BuildTak type, as the sticker will be torn off the bed. This can also happen with glass. This happens mostly with materials such as ABS or Nylon, and it is very difficult for it to happen when printing PLA. Depending on our problem we can look for a solution accordingly:
