Why is no sound coming out of my AV receiver?
No sound coming out from the receiver. I saw a solution on youtube which suggested that if you heat a particular chip for few minutes, it starts working. I used hair dryer to do that. It worked for me for few minutes but the again no sound. Answered! View the answer I have this problem too Is this a good question?
Why does sound only come from one speaker?
If it doesn’t then check the cables and source connected to AV2. Reverse the left and right audio cables at the source. If the same speaker doesn’t play then then the receiver has problem. If the other speakers starts playing then either the cable or the source have a bad channel.
How can I tell if my surround sound speaker is working?
There should be a clicking sound coming from the speaker when its wires touches the battery terminals. This is to eliminate the remote possibility that the speaker and/or its wires may have an issue. I did the battery test on surround sound speaker terminal wires where they attach to receiver, I got sound from both speakers.
Why is my sound not working on my TV?
[Audio & Visual]No sound output from AV Receiver/Sound Bar. [Audio & Visual] No sound output from AV Receiver/Sound Bar. Sound may not output from AV Receiver/Sound Bar due to temporary HDMI identification error or recent software update on the TV.
What to do if there is no sound from an AV receiver?
If the sound comes normally, please change other HDMI cable. If still no sound output from the AV Receiver/Sound Bar even after checking above points, please confirm if the AV Receiver/Sound Bar and the TV have the HDMI Control function. Was this answer helpful? Thank you for your feedback!
Why do I get no sound from my center speakers?
No sound from the center or surround speakers. If you are not able to get any surround sound effects when playing audio, there may be a problem with your hookup or there may be an incorrect setting. Follow these steps to try to resolve this issue.
Can you hear all the speakers on a TV?
When watching one of these TV channels, only the front speakers will output audio. In order to hear audio from all speakers, make sure to change the sound field to DPLII. This creates a simulation of 5.1 digital audio.
What to do if there is no sound from my surround sound speakers?
plug in a pair of headphones and determine if there is sound. This is both a test and try of a fix. Do the plug in/un-plug a couple of times. There is a hidden speaker cutoff switch inside the headphone jack; consider a RESET. A reset is both a test and a try of a fix.
