Why does my Samsung subwoofer keep turning off?
The sound on your wireless subwoofer can drop out if there is interference or a physical obstruction between the soundbar and subwoofer. You can try checking the firmware version, resetting, and reconnecting the subwoofer.
What makes a sub Pop?
Pop: A clipped signal tries to move the cone too quickly Nothing travels that fast, and the sub either tears itself apart trying, or the flapping cone wobbles just enough to jam the coil in the magnet’s voice coil gap, killing the sub.
What should I do with my sub-ts11 subwoofer?
Additional Bass AdjustmentsIn addition to the volume adjustments described above, the SUB-TS11 subwoofer includes a Phase Switch ∞ and a Filter Switch ™ that can be used to adjust the bass response to suit your listening environment or taste.In most situations, the Phase Switch ∞ should be left in the NORMAL position.
How to troubleshoot a subwoofer that turns off?
If this is the case, set the Power Save switch to the OFF position to prevent the subwoofer from turning off by itself. Check the cables or speaker wires for proper connection between the subwoofer and the main unit. If using an active subwoofer, ensure it is connected to a working AC outlet.
Why does my subwoofer make a 60 hertz noise?
Induced 60-Hertz noise is hum that comes into your audio system through contact or proximity to power circuits or cables. While this can happen internally in your devices, the more common cause is bad routing of cables.
Why does my subwoofer hum when there is nothing going in?
If it still hums when there’s nothing going in, your issue is probably with the sub, which needs repair or replacement. (2) Induced Noise: Induced 60-Hertz noise is hum that comes into your audio system through contact or proximity to power circuits or cables.
If this is the case, set the Power Save switch to the OFF position to prevent the subwoofer from turning off by itself. Check the cables or speaker wires for proper connection between the subwoofer and the main unit. If using an active subwoofer, ensure it is connected to a working AC outlet.
Is there a problem with my subwoofer Hum?
If the above attempts have failed to resolve (or have only partially resolved) your problems, it’s time to broaden the search. While subwoofer hum can often be isolated to the sub and its immediate link to a receiver, another distinct possibility is that the hum is getting into the audio stream further upstream.
Do You need A Y-splitter for a subwoofer?
According to my knowledge using a Y-splitter shouldn’t be necessary on modern subwoofers but you newer know. Would you suggest to turn up the level on the subwoofer channel in the receiver to try to avoid reaching the turn off level of the sub (and then turn down the volume on the sub to keep the same SPL)?
Induced 60-Hertz noise is hum that comes into your audio system through contact or proximity to power circuits or cables. While this can happen internally in your devices, the more common cause is bad routing of cables.
