How do I connect my Bluetooth subwoofer to my Vizio sound bar?

Press and hold the Pairing button on the back of the Subwoofer for 5 seconds. The LED on the back of the Subwoofer will begin to blink. Press and hold the Power button on the top of the Sound Bar for 5 Seconds. The LED indicators on the front will flash 3 times.

Why does my subwoofer not sync with my sound bar?

Up untill recently the pair have worked together fine. Now though, the subwoofer won’t sync to the soundbar. When the subwoofer is powered on, the red stand by light comes on for a second and goes out. Then blue wireless connection light blinks constanty and never connects to the soundbar. This occurs even when the manual reset steps are completed:

How do you pair a subwoofer to a bar?

Press the pairing button on the subwoofer and then follow the instructions to manually pair. Everything must be unplugged in order to pair the bar and subwoofer without issue. Strange but work like a charm if you follow these directions closely.

What to do if your subwoofer is not pairing up?

If you run into a pairing issues it is important to unplug everything from the main unit (all HMDI and other connections except for power) and reset the bar by pressing and holding three buttons (volume up and down and source) until the device shows that is has reset. Unplug the power cable and unplug the subwoofer.

How to pair a JBL to a subwoofer?

Fought with the open box JBL right out of the box to get it paired to the sub. Make sure both have power …. hit the PAIR SUB button ON THE SUB – the white light will go from a slow white blink to a FAST white BLINK…

Can a sound bar be connected to a subwoofer?

If you are using the VHT210, VHT215 or the VHT510 models you will need to ensure that the switch on the back of the Sound Bar is set to hub. If this does not work try unplugging both the subwoofer and Sound Bar and plug them back in and then follow the steps above again.

How to pair the subwoofer with your Vizio sound bar?

How to Pair the Subwoofer with your VIZIO Sound Bar. If you are having issues pairing your subwoofer to your Sound Bar make sure that the following steps have been completed: 1. Ensure that both devices have been plugged in and turned on. 2. Ensure that the devices are about a foot apart facing each other for the initial pairing.